is recommended to use the product at room temperature and
humidity in order to maintain it's optimum performance.
lifetime can be shortened when it is used under conditions of
high temperature and humidity.
it is used at low temperature of 10°C or lower, response
time and brightness are affected in such a way that the proper
display may not be obtained.
exposed to drastic fluctuation of temperature (hot to cold or
cold to hot), the product may be affected; specifically, drastic
temperature fluctuation from cold to hot, produces dew on the
surface which may affect the operation of the polarizer and
is recommended to use the product in a clean place and to
exercise caution to ensure it is not affected by dust or liquids,
1. If used
in dusty place, dust may cause an electrical short inside the
product resulting in malfunction
2. If the
product is contaminated by humid or liquid substance, polarizer
may be discolored. If the liquid enters may enter the product
to cause electrical failure or corrosion which, in turn, may
lead to malfunction
LCD is a product made of glass, caution must be exercised
in using it. It is recommended to handle it with care since
shock, vibration, and careless handling may seriously affect
LCD surface is made of a soft film that is vulnerable to scratch
and thus to damage by a sharp article.
the LCD is made of glass, it may be damaged if it is bent. If
it falls from a high place or receives a strong shock, the glass
may be broken.
LCD product is composed of sensitive electronic parts and components.
Therefore it must be grounded by ESD protection equipment (wrist
band, etc.) before it is directly handled.
4. It is
recommended that the product be handled with soft gloves during
Assembly, etc. The LCD surface is made of soft film, vulnerable
to scratches and thus to damage by a sharp articles.
5. Do not
bend or stretch the back light wire.
6. It is
recommended that the product surface be cleaned it is dirty
by using IPA (Isoprophyl Alcohol) or Hexane. Keytone type material
(Acetone), Ethyl or Methyl chloride must not be used as they
can cause damage to the Polarizer.
Driver IC of the TFT LCD for a Notebook PC is exposed on the
back of the screen. If mechanical stress is applied to this
area, it can cause failure. Do not hold or press this part with
LCD is a sensitive electronic equipment, it is urged to comply
with following precautions.
disassemble LCD product under any circumstances. If unqualified
operators or users assemble the product after disassembling
it, it may not function or its operation may be seriously affected.
2 . When
it is not in use, the screen must be turned off or the pattern
must be frequently changed by a screen saver. If it displays
the same pattern for a long period of time, brightness down/image
sticking may develop due to the LCD structure.
3. It is
recommended that the product be stored in a cool and dry place
in its original product box.
dispose of the product according to the relevant laws and regulations.
A small quantity of mercury is contained in lamp inside LCD
clicking on one of the following links: